Optical Transceiver Module
100G QSFP28
new products

100GbE SR4 QSFP28 MMF Optical Transceiver MMA1B00-C100D Fiber Modules

Mellanox® MMA1B00-C100D is a 4-channel, pluggable, QSFP28 optical transceiver designed for use in 100GbE Ethernet. 




  • item no.:

    QSFP-100G-SR4
  • lead time:

    2-3 working days
  • product orgin:

    China
  • brand:

    Top-Trans
  • shipping port:

    Shenzhen
  • payment:

    ex-w
  • Warranty:

    3 Years
  • Condition:

    New
  • Temperature:

    0℃~70℃/ -5℃~85℃/ -20℃~85℃
  • Data Rate:

    100G
  • Distance:

    100m
  • Wavelength:

    850nm
  • Connector:

    LC
product details


100GbE SR4 QSFP28 MMF Optical Transceiver MMA1B00-C100D Fiber Modules

Mellanox® MMA1B00-C100D is a 4-channel, pluggable, QSFP28 optical transceiver designed for use in 100GbE Ethernet. This module incorporates Mellanox integrated circuit technology, in order to provide high performance at low power. The transceiver operates over parallel multi-mode (MMF) fiber, using a nominal wavelength of 850nm, and is SFF-8665 compliant.


HIGHLIGHTS

Up to 100Gb/s data rate 

Very low power consumption 2.2W 

Designed with Mellanox ICs 

Selectable retiming for both Tx and Rx 

Programmable Tx input equalizer 

Programmable Rx output amplitude 

Programmable Rx output emphasis 

SFF-8665 compliant QSFP28 

Single 3.3V supply 

QSFP28 power class 3 

BER better than 1E-15 

Class 1 laser safety 

Up to 100m on OM4 and 70m on OM3 multimode fiber at 100Gb/s 

Up to 100m on OM3 at 40Gb/s 

SFF-8636 compliant digital diagnostic monitoring (DDM) 

Hot pluggable 

RoHS compliant 

IEEE 802.3 100GBASE-SR4 compliant 

IEEE 802.3 40GBASE-SR4 compliant 

SFF-8636 compliant I2 C management interface


MMA1B00-C100D has a standard QSFP28 connector on the electrical side towards the host system supporting CAUI-4. The optical interface is composed of four optical channels/fibers in each direction, intended for a parallel MMF cable via a standard MPO connector. Each channel/fiber operates at signaling rates up to 25.78125GBd.


The transceiver has selectable re-timing in both transmit and receive directions as well as it provides digital diagnostic monitoring of supply voltage, temperature, transmit/receive power, and laser bias. Rigorous production testing ensures the best out-of-the-box installation experience, performance, and durability.


Mellanox LinkX optical transceivers include a 1-year limited hardware warranty, which covers parts repair or replacement.






Compatibility:

Testing in Cisco/ Brocade/ Juniper/ Dell/ Arista/ HPE/ H3C etc devices to guarantee 100% compatible with your equipment. 


OEM& ODM: 

Customized label and package , OEM and ODM service offered



Send Us An Inquiry

We will contact you as soon as possible!

related products
  • 100GBASE QSFP28 100G QSFP28 100GBASE-LR4 100GB 10KM 5G Wireless SFP Transceiver

    The 100G QSFP28 100GBASE-LR4 10KM transceiver data sheet (singlemode, 1310nm, 10km) is Compatible with Linksys, Ericsson, DCN, Allied, price list on Topstar , buy it now!

  • 100GBASE QSFP28 Optical Module 100G QSFP28 Transceiver 100GBASE-ER4 100GB 40KM 5G Optical Module

    Buy 100Gb/s 100GBASE-ER4 40KM QSFP28 transceiver compatible with Juniper Huawei Brocade, Force10 Networks 100GBASE-ER4 (SMF, 1310nm, 40km) & price list on Topstar, Hot pluggable QSFP28 MSA form factor,Compliant to IEEE 802.3ba 100GBASE-ER4,Up to 40km reach for G.652 SMF,Single +3.3V power supply,Operating case temperature: 0~70oC,Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm),Receiver: 4x25Gb/s PIN ROSA,4x28G Electrical Serial Interface (CEI-28G-VSR),Maximum power consumption 4.0W,Duplex LC receptacle,RoHS-6 compliant

  • 100GBASE QSFP28 Fiber Transceiver 100G QSFP28 CWDM 2KM MPO Multi Mode Fiber Transceiver

    This product is a 100Gb/s transceiver module,which is 10GBASE 100G QSFP28 CWDM 2KM. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

  • 100GBASE QSFP28 100G QSFP28 100GBASE-SR4 100GB 100M SR Transceiver Module

    The 100G QSFP28 100GBASE-SR4 module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

  • Finisar FTLC1152SGPL  QSFP28 100GBASE-IR4 Finisar FTLC1152SGPL compatible 100GBASE-IR4 CWDM QSFP 2KM QSFP28 module

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant with the QSFP MSA,CWDM4 MSA and portions of IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts  them  to 4 output  channels   of electrical data.

  • Finisar FTLC9551REPM QSFP28 100GBASE-SR4 Finisar FTLC9551REPM compatible 100GBASE-SR4 OTU4&128G 100m QSFP

    This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber.

  • Finisar FTLC1152SGPL  QSFP28 100GBASE-IR4 Finisar FTLC1151RDPL compatible 100GBASE-LR4 10km 100G QSFP28 CWDM4 Optical Transceiver

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

  • Finisar FTLC1151RDPL  100GBASE-LR4 QSFP28 Compatible Finisar FTLC1151RDPL Compatible 100GBASE-LR4 QSFP28 10km Optical Module

    This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!